Prince 3100

SYSTEM DESCRIPTION

 

To ensure that the water running down the sash need not run in to the frame and to the drainage chamber, a rain drip groove is provided in the sash.

 

Prince profile has a screw guidance system to increase the tear out resistance of the screws and prevent a run-out during automatic screwing.

 

This rubber sealing is designed as folding seal which is used for both outer frame sealing and inner sash sealing.

 

Hardware of fittings channel is designed in accordance with European standard with the width of 16mm and depth of 9 mm. This will be suited to fit to the commercially available fittings.

 

Prince profile has provided a groove for middle seal in the sash for more insulating advantage against dust, air and water penetration.

 

The Prince profile has an outer frame drainage chamber, which collects the volume of water that goes through a sufficiently large drainage opening to the front.

 

Outer frame reinforcement chamber is hermetically sealed and the frame drainage chamber is made through the front chamber. Reinforcement U-profile is fitted in this chamber, and in between the PVC wall and the reinforcement, an air clearance is provided to lessen the difficulties of fitting the reinforcement. Also, multi-chambers provides better insulation with regards to thermal and sound.

 

Prince Frame Profile has an outer frame construction depth of 83mm. This dimension provides the optimum requirements to function the multi-chambers for drainage, ventilation, reinforcement and fittings.

 

The perimeter of the frame is provided with clip grooves to receive additional profiles and for rigidity. This provides for fitting overlap profiles, coupling profiles over the full length. The same grooves are provided in the sash to fit the glazing beads, which can accommodate single glazing and double-glazing from 6-24mm thick.

 

Outer frame reinforcement chamber is hermetically sealed and the frame drainage chamber is made through the front chamber. Reinforcement U-profile is fitted in this chamber, and in between the PVC wall and the reinforcement, an air clearance is provided to lessen the difficulties of fitting the reinforcement. Also, multi-chambers provides better insulation with regards to thermal and sound.

 

Prince frame profile has the weather edges, which permits a simple fitting of the sash section and provides a large overlapping area for the seal.

 

This rubber sealing is designed as folding seal which is used for both outer frame sealing and inner sash sealing.

 

The inside perimeter of the frame is provided with a built-in overlap of 30mm in length which gives more rigidity on the frame profile and bring an appropriate aesthetic view of the window inside.